36. To install a second IDE drive into a computer, you must:
A. Set the master-slave jumper to slave on the second drive
B. Use the IDE configuration software to set the new drive as slave
C. Verify that you define the new drive as D: in the CMOS setup
D. Verity that you attach the drive to the connector at the end of the ribbon cable
E. None of the above
37. What can you use to ensure power is not interrupted, resulting in corrupted data?
A. UPS
B. Proper grounding
C. Surge protector
D. Nuclear powered thermal protective underwear
E. None of the above
38. When configuring is a network interface cards without jumpers or plug and play, what is used to set the IRQs?
A. DMA
B. CMOS
C. the OS
D. configuration software
E. None of the above
39. MSD exe does not have information on:
A. cache
B. video
C. operation system
D. com ports
E. None of the above
40. What command is used to hang up a MODEM when using the “AT Command set”?
A. ATZ
B. ATD
C. ATR
D. ATH
E. None of the above